LEAD EDGE FEEDER

- Bottom wheel-type suction box, equipped with air blower and automatic damper, to make the air volume adjustable by frequency converter;

- Movable back gauge with up and down adjustable sheet supporting plate;

- Rear jogger at feeder in preparation for future in line with prefeeder (Optional);

- Pneumatic side push guide plates (left and right sides);

- Left and right hand side guides with separating and synchronizing adjustment available;

- Front guide plate with back and forth, up and down micro-adjustments;

- Automatic pushing frame (Optional);

DIE-CUTTING SECTION

- High strength die-cutting frame;

- High precision mobile platen and driver;

- Die-cutting station safety door plus electrical and mechanical safety system;

- Die chase positioning and automatic locking system, centerline system making the cutting die and stripping die centered quickly and precisely;

- Synthetic supporting plate positioning and safety locking system, cutting plate micro-adjustment system;

- Pneumatic clutch/break and safety control system;

- Motorized pressure adjustment system and indication of die cutting pressure by means of digital read out;

- Gripper bar and driving chain;

- Gripper bar chain safety locking device;

- Gripper bar chain guide rails are made of synthetic materials;

- High quality index unit and gears for gripper bars;

- Overloading protection torque limit system for gripper bars and chains;

- Photo sensor detection system when gripper bar and sheets arrive and depart;

- Left and right front lay locking blocks, separate adjustments available;

- Automatic forced lubrication system recycles fluid and is equipped with oil gauge and interruption alarm;

- Automatic main drive chain lubrication;

- Pneumatic die-cutting plate locking device.

STRIPPING SECTION

- Center line system for quick upper and middle stripping die set up and change over;

- Fully open-type upper stripping frame, and front/back micro-adjustment system for upper stripping tools;

- Lower stripping frame mechanism with center line system for quick lower stripping die set up and change over (Optional);

- Push button of gripper opening is added for easy taking out the production sample at stripping section;

- Lower stripping pin system (Optional);

- Front edge waste removal system and center line system for quick setup and changeover of front edge waste stripping tool;

- Full stripping with/without lead edge waste stripping convertible by one button, no tool change, more operator friendly and safe operation;

- Safety door at stripping station; electrical and mechanical safety system.

DELIVERY SECTION

- Conveyor belt type delivery table;

- Conveyor belt bundle delivery table can be prepared for future connection with breaker for automatic in line operation;

- Non-stop auxiliary delivery table;

- Batch delivery conveying control system;

- Electrical batch counter;

- Front jogger device;

- Motorized side joggers with side sheet supporting device;

- Motorized delivery back gauge and sheet tail supporting device;

- Safety door at delivery section; electrical and mechanical safety system.

DELIVERY SECTION

- Conveyor belt type delivery table;

- Conveyor belt bundle delivery table can be prepared for future connection with breaker for automatic in line operation;

- Non-stop auxiliary delivery table;

- Batch delivery conveying control system;

- Electrical batch counter;

- Front jogger device;

- Motorized side joggers with side sheet supporting device;

- Motorized delivery back gauge and sheet tail supporting device;

- Safety door at delivery section; electrical and mechanical safety system.